Shout out your big announcement here!

Werkzeuge Auto Reparatur Werkzeug Auto Dent Reparatur Dent Puller Kit 2 in 1 Slide Hammer Reverse Hammer Kleber Tabs Saug tassen

Description

How to use this dent removal without repair kits
1. clean the dent with a clean, damp cloth;
2. Assemble the glue in the glue gun, pull the trigger to let the glue stick in the glue gun, connect the power source and preheat for 5 minutes;
3. Use a proper drawing seal. Large dent requires a large drawing seal. (Note: the larger the
Drawing seal is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Quickly spot the drawing seal with hot melt glue in the center of the dent, press gently until the glue hardens and sticks (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter in winter);
6. Align the T-shaped repairer and press the drawing seal with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a line board. If dent still exists, knock it lightly with a flattening hammer or pen;
8. Clean the repaired place with a clean, damp cloth.


Material: carbon steel Size: 50CM Standard: Car dent repair tool, dent repair device, hail pit repair equipment   




  

Read more

Werkzeuge Auto Reparatur Werkzeug Auto Dent Reparatur Dent Puller Kit 2 in 1 Slide Hammer Reverse Hammer Kleber Tabs Saug tassen

Product form

How to use this dent removal without repair kits 1. clean the dent with a clean, damp cloth; 2. Assemble... Read more

SKU: CJJZGJGJ00104-Full set

$67.89 Excl. VAT

    • Tell a unique detail about this product
    • Tell a unique detail about this product
    • Tell a unique detail about this product

      Description

      How to use this dent removal without repair kits
      1. clean the dent with a clean, damp cloth;
      2. Assemble the glue in the glue gun, pull the trigger to let the glue stick in the glue gun, connect the power source and preheat for 5 minutes;
      3. Use a proper drawing seal. Large dent requires a large drawing seal. (Note: the larger the
      Drawing seal is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
      5. Quickly spot the drawing seal with hot melt glue in the center of the dent, press gently until the glue hardens and sticks (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter in winter);
      6. Align the T-shaped repairer and press the drawing seal with hot melt glue, pull the sliding rod backwards to pull up the dent;
      7. Check with a line board. If dent still exists, knock it lightly with a flattening hammer or pen;
      8. Clean the repaired place with a clean, damp cloth.


      Material: carbon steel Size: 50CM Standard: Car dent repair tool, dent repair device, hail pit repair equipment   




        

      Read more

      Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account

      Scan the QR code below