Outils de réparation automobile, kit de réparation de bosses, extracteur de bosses 2 en 1, marteau coulissant, marteau inversé, onglets adhésifs, ventouses

Description

How to use this dent removal without repair kits
1. clean the dent with a clean, damp cloth;
2. Assemble the glue in the glue gun, pull the trigger to let the glue stick in the glue gun, connect the power source and preheat for 5 minutes;
3. Use a proper drawing seal. Large dent requires a large drawing seal. (Note: the larger the
Drawing seal is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Quickly spot the drawing seal with hot melt glue in the center of the dent, press gently until the glue hardens and sticks (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter in winter);
6. Align the T-shaped repairer and press the drawing seal with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a line board. If dent still exists, knock it lightly with a flattening hammer or pen;
8. Clean the repaired place with a clean, damp cloth.


Material: carbon steel Size: 50CM Standard: Car dent repair tool, dent repair device, hail pit repair equipment   




  

Lis Plus

Outils de réparation automobile, kit de réparation de bosses, extracteur de bosses 2 en 1, marteau coulissant, marteau inversé, onglets adhésifs, ventouses

Fiche produit

How to use this dent removal without repair kits 1. clean the dent with a clean, damp cloth; 2. Assemble... En savoir plus

Rupture de stock

$67.89 Excl. T.V.A.

    • Expédié aujourd'hui ? Commandez dans : Jul 15, 2026 17:00:00 -1100

    Description

    How to use this dent removal without repair kits
    1. clean the dent with a clean, damp cloth;
    2. Assemble the glue in the glue gun, pull the trigger to let the glue stick in the glue gun, connect the power source and preheat for 5 minutes;
    3. Use a proper drawing seal. Large dent requires a large drawing seal. (Note: the larger the
    Drawing seal is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
    5. Quickly spot the drawing seal with hot melt glue in the center of the dent, press gently until the glue hardens and sticks (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter in winter);
    6. Align the T-shaped repairer and press the drawing seal with hot melt glue, pull the sliding rod backwards to pull up the dent;
    7. Check with a line board. If dent still exists, knock it lightly with a flattening hammer or pen;
    8. Clean the repaired place with a clean, damp cloth.


    Material: carbon steel Size: 50CM Standard: Car dent repair tool, dent repair device, hail pit repair equipment   




      

    Lis Plus

    Recently viewed products

    Connexion

    Vous avez oublié votre mot de passe ?

    Vous n'avez pas encore de compte ?
    Créer un compte